home *** CD-ROM | disk | FTP | other *** search
- Welcome to the world of remote bulletin boards for the IBM PC and RBBS-PC!
- Copyright 1983, 1984 by D. Thomas Mack
- Before installing RBBS-PC you must first format 3 diskettes. The first
- diskette must be formatted with DOS on it (label it RBBS-PC). The second
- diskette must have a copy of BASICA.COM on it. The third diskette will be
- used to put the RBBS documentation on. It is over 100K and consists of 34+
- pages that you will be referring to often. Mark the diskettes as follows:
- Disk Label General Description
- 1 RBBS-PC This contains the RBBS-PC "system files" and when running
- RBBS-PC in a two drive system would be in drive A.
- 2 DATA01 This contains the RBBS-PC "data files" and when running
- RBBS-PC in a two drive system would be in drive B.
- 3 RBBSPCDOC This will contain the RBBS-PC documentation which you
- will be referring to often. Print it out and then keep
- this and the distribution diskette stored safely away.
- When you have done the above, you are ready to start getting ready to set
- up RBBS-PC. Place your distribution diskette in drive B and your RBBSPCDOC
- diskette in drive A and type B:DOC.BAT. This will unsqueeze the
- documentation. After reading the documentation (the first of many times),
- make sure your distribution diskette is in drive B and type B:STARTUP.BAT.
- Enjoy.......
- Tom Mack
- 10210 Oxfordshire Road
- Great Falls, Virginia 22066